Diamond Audio Amplifiers

Diamond audio has a range of amplifiers such as the Diamond Audio D1000.1 Mono subwoofer amplifier that powers your subwoofer with 1,100 watts RMS of pure and clean music that does not allow any distortion or audible colouration.  Such amplifiers can work well with most subsystems as they have a load of 1 ohm. Additionally, the diamond audio amplifiers can reach a respectable 2,200 watts RMS at 2 ohms by strapping a second D1000.1 to the first one. As with other diamond audio products, the amplifiers come with heavy aluminium chassis that ensures superior thermal stability and are ultra-compact as well. 

 

Power Efficiency


Also, the amplifiers have a four-layer, glass epoxy circuit board that is not only reliable but enhances its performance as well. The amplifiers have bridgeable high power resolutions and are powered with Full Range Class D amplifier technology. 

 

Heat Management


It is a known fact that an amplifier’s sound quality and life are affected due to overheating. To overcome this issue, focussed mass heatsinks have been developed by Diamond in which around three-fourths of the mass is directly attached to the components where most of the heat is generated, thereby allowing the heat to be drawn away.  Additionally, using a special system, the transistors of the diamond amplifiers are mounted to the heatsink so as to allow a better heat flow as compared to the commonly used clips. 

 

Additional features

 

The diamond amplifiers also come with a bass boost, variable low-pass and subsonic filters and a phase switch that power the subsystem to its best.

Diamond Audio Speakers/Subwoofers


Diamond audio has come up with a variety of car speakers such as D172i and a range of subwoofers such as D312D2.2 of the D3 series to enhance your experience of enjoying your favourite music when you hit the road.  The quality of the music that is provided by Diamond Speakers/Subwoofers ensure that you have the most entertaining ride no matter how short / long it is. To provide consistent strength across the cone area, the diamond speakers are fitted with an injection moulded copolymer cone. Additionally, the precise cone movement is ensured by light and responsive woofers that are surrounded by resilient rubber. This guarantees that the punches from the guitars and the drums are in plenty and sound to you just the way you want to hear. Not just the inner quality, these diamond speakers have a glossy, high end appearance which is because the woofers come with a brushed titanium finish.  Most of the usual car spears are fitted with plastic film tweeters. However, the diamond speakers come with aluminium dome tweeters which ensure sparkling and extending highs giving you a rich musical experience, which is a pleasure to your ears. The tweeters receive high notes due to the built-in crossovers and for natural sounding instruments and vocals, low notes are received by the tweeters. The strength and stability of the diamond speakers are provided by a heavy-gauge stamped steel basket giving you a product for lifetime use.


Moreover, the diamond sub comes with an FEA Optimized High Power Motor and has an RMS power handling of 500 Watts and Peak power handling of 1000 Watts. Heat Dispersing Woofers


The diamond woofers not just give you that perfect high-performance bass for listening to high and powerful notes thereby giving a ride of your dreams. The heat generated in the woofers is directed away by the stamped aluminium dust cap that ensures that there is no trapping of heat in the enclosure of the woofer.


Aluminum Voice Coils


To ensure power handling and dissipating of heat, the diamond audio woofers come with hefty 2-1/2" aluminum-coated copper voice coils. Another reason for the woofer staying cool and healthy is the discarding of warm air by the pole piece from the interior of the woofer. Apart from this, if you want to add another sub, later on, it is easy to do so as there are a number of options to wire the sub in your system due to the presence of dual 2-ohm voice coils. Furthermore, unwanted resonance is virtually eliminated due to the unique stamping technique used in the basket.


The Uniqueness of Diamond audio Speakers/Subwoofers


The spider assembly in most subs is glued to the basket. However, in diamond subs, dual spider assembly has been used that is not just glued to the basket but is screwed as well. This arrangement virtually eliminates the possibility of a mechanical failure. This feature coupled with a heavy-gauge stamped steel basket gives the sub the strength and the stability to last a lifetime.


Diamond Audio - Car Audio - Subwoofer Enclosures

A subwoofer enclosure is integral to the functioning and output of a subwoofer. It is always advisable to properly install the enclosures before the installation of the subwoofers. An improper installation or ill-fitted enclosure can not only affect the performance of the subwoofer but also damages it physically as well. So, what is so special about the diamond sub enclosures? Diamond subwoofer enclosures have been designed in a manner so as to maximize the performance of the subwoofer. The diamond sub enclosures have been made from MDF wood which ensures that there is no mechanical damage due to the vibrations from the drivers.  Giving a perfect fit to the subwoofers, these diamond audio enclosures give a classy look to the subwoofers and prevent them from any physical damage such as tears or rips.


Another important characteristic of the diamond sub enclosures is that they do not allow heat to be trapped inside them. The heat that is generated is vented out by the pole piece from the interior of the woofer that allows the subwoofer to remain cool as well as last a lifetime even if it is played for an extended period of time. Apart from this, if you want to add another sub, later on, it is easy to do so as there are a number of options to wire the sub in your system due to the presence of dual 2-ohm voice coils. Furthermore, unwanted resonance is virtually eliminated due to the unique stamping technique used in the basket.


Back to 12V

For information about current inventory and item availability

Call (770) 977-5774

Share by: